AL400ULX

Power Supply Charger, Single Class 2 Output, 12VDC @ 4A or 24VDC @ 3A, 115VAC, BC300 Enclosure

AL400ULX is a power supply/charger that converts a 115VAC/60Hz input into a single 12VDC or 24VDC Class 2 Rated power limited output.

Specifications

  • Input
    • Input 115VAC, 60Hz, 3.5A.
    • Input fuse rated @ 3.5A/250V.
  • Output
    • 12VDC or 24VDC selectable output.
    • Burglar Alarm Applications(UL 603):
    • 12VDC = 11.5VDC-13VDC.
    • 24VDC = 23VDC-26VDC.
    • 12VDC @ 4A or 24VDC @ 3A supply current.
    • Class 2 Rated power limited output.
    • Filtered and electronically regulated output.
    • Short circuit and thermal overload protection.
  • Battery Charging
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
    • Maximum charge current: 0.7A.
    • Zero voltage drop when switched over to battery backup.
    • (Batteries are sold separately).
  • Supervision
    • AC fail supervision (form "C" contacts).
    • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
    • Low battery supervision (form "C" contacts).
    • Battery presence supervision (form "C" contacts).
  • Visual Indicators
    • AC input, DC output and Battery LED indicators.
  • Temperature
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70°C ( - 4° F to 158° F).
    • Relative Humidity: 85% +/- 5%.
      • BTU/Hr. (approx.):
        • 12VDC: 25 BTU/Hr.
        • 24VDC: 37 BTU/Hr.
    • System AC input VA requirement: 402.5VA.

Agency Listings

UL Listed For:
Access Control System Units (UL294)
Power Supplies for use with Burglar Alarm Systems (UL603)
Power Supplies for Fire Protective Signaling Systems (UL1481)
Hospital Signaling and Nurse Call Equipment (UL1069)
cUL Listed For:
CSA Standard C22.2 No.205-M1983, Signal Equipment
CSA Standard C603-M1988, Burglar Alarm System
 
CSFM - California State Fire Marshal Approved
 
MEA - NYC Department of Buildings Approved
 
NFPA 72 Compliant
 
FM Approved

Dimensions & Weight

Enclosure:
  • Wall mount enclosure for indoor use.
  • Dimensions 13"W x 13.5"H x 3.25"D (330 mm W x 343 mm H x 83 mm D).
  • 1/2" and 3/4" combination knockouts.
Weights (approximate):
  • Product Weigtht: 6.95 Lbs. (3.15 kg).
  • Shipping Weigtht: 8.75 Lbs. (4 kg).