T2RM7CK1V
8-Door Altronix/Mercury Access & Power Integration Wired Rack Mount Kit - Trove2M2R with eFlow104NBV, ACMS8, VR6, PDS8
Altronix T2RM7CK1V is a 8-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury* hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T2RM7CK1V accommodates one (1) Intelligent Dual Reader Controller and three (3) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications. *Also compatible with these authentic Mercury partners: AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, Lenel/S2, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt
Specifications
eFlow104NBV Power Supply/Charger
Input
- Voltage: 220VAC (working range 198VAC - 256VAC), 50/60Hz, 2.7A.
- Main Fuse: 6.5A / 250V.
Output
- Voltage: 24VDC @ 10A.
- Auxiliary: 1A (unswitched).
- Other: Overvoltage protection. Filtered and regulated.
Battery Charging
- Type: Sealed lead acid or gel type.
- Failover: Upon AC loss, instantaneous.
- (Batteries are sold separately).
Fire Alarm Disconnect
- Supervised: Latching or non-latching.
- EOL: 10K Resistor.
Supervision
- AC Failure: Form “C” contacts.
- Battery: Form “C” contacts.
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
Indicators LED
- AC Input: 220VAC is present.
- DC Output: 24VDC is present.
- Battery: Discharged or not connected.
ACMS8 Dual Input Access Power Controller
Input
- Voltage: 24VDC from eFlow104NBV and 12VDC from VR6.
- Input Fuse: 15A / 32V.
Outputs
- Voltage: 24VDC.
- Eight (8) independently controlled fused outputs:
- a) Fail-Safe and/or Fail-Secure power outputs Form “C” Relays rated 28VAC or VDC @ 2.5A.
- b) Auxiliary power outputs (unswitched).
- c) Any combination of the above.
Outputs Ratings
- Fuses: 3A/32V.
Indicators (LED's)
- Red LEDs: Outputs are triggered (relays energized).
- Green LED: FACP disconnect is triggered.
VR6 Voltage Regulator
Input
- Voltage: 24VDC from eFlow104NBV.
Output
- Voltage: 12VDC.
- Current: 6A continuous.
- Other: Surge suppression.
Indicators (LED)
- Input: 24VDC is present.
- Output: Powered.
PDS8 Power Distribution Module
Input
- Voltage: 24VDC from eFlow104NBV and 12VDC from VR6.
- Fusing: 10A / 32V.
Outputs
- Voltage: 12VDC and/or 24VDC.
- Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
- Fuses Rating: 3A / 32V.
Indicators (LED)
- DC Output: Eight (8) individual output LEDs.
- Green: 12VDC
- Red: 24VDC.
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity
- Relative Humidity 85% +/- 5%.
BTU/Hr (approx.):
- 123 BTU/Hr.
Agency Listings
Accessories
| Name | Description |
|---|---|
| MM12 | Mounting Magnets, Twelve (12) Quantity per Pack |
| MM24 | Mounting Magnets, Twenty Four (24) Quantity per Pack |
| MM4 | Mounting Magnets, Four (4) Quantity per Pack |
| MM8 | Mounting Magnets, Eight (8) Quantity per Pack |
| RE2 | Rack Mount Battery Enclosure, 2U |
| WM100 | Magnetic Cable Tie Mounts |
| WM25 | Magnetic Cable Tie Mounts |
| WM5 | Magnetic Cable Tie Mounts |
Dimensions & Weight
Enclosure:
- Trove Rack Mount Enclosure
- Accommodates up to four (4) 12VDC/7AH Batteries.
- Dimensions 19"W x 3.375"H x 33.25"D (482.6 mm W x 82.8 mm H x 844.6 mm D).
Weights (approximate):
- Product Weigtht: 40.5 Lbs. (18.37 kg).
- Shipping Weigtht: 45.5 Lbs. (20.64 kg).