T3MK75F16SQ
16-Door Altronix/Mercury Access and Power Integration Kit - Trove3M3 with eFlow104NB, eFlow102NB, (2) LINQ8ACM, (2) LINQ8PD, NetWay5A, BR1, RSB2
Altronix T3MK75F16SQ consists of Trove3 enclosure and TM3 Altronix & Mercury backplane with one 24VDC @ 10A and one 12VDC @ 10A power supply/chargers, two (2) eight (8) fuse protected output managed dual voltage power distribution modules, two (2) eight (8) fuse protected output managed dual voltage access control modules and 5-port hardened switch. This kit also accommodates various combinations of Mercury* boards for up to sixteen (16) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs. *Also compatible with these authentic Mercury partners: AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, Lenel/S2, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt
Specifications
eFlow104NB Power Supply/Charger - 1
Input
- Voltage: 120VAC, 60Hz, 4.5A.
- Main Fuse: 6.3A / 250V.
Output
- Voltage: 24VDC @ 10A.
- Auxiliary: Class 2 power-limited @ 1A (unswitched).
- Other: Overvoltage protection. Filtered and regulated.
eFlow102NB Power Supply/Charger - 2
Input
- Voltage: 120VAC, 60Hz, 3.5A.
- Main Fuse: 5A / 250V.
Output
- Voltage: 12VDC @ 10A.
- Auxiliary: 1A (unswitched).
- Other: Overvoltage protection. Filtered and regulated.
Both Power Supplies
Battery Charging
- Capacity: 12VDC/12AH (4 within enclosure); 40AH/65AH (requires separate enclosure).
- Type: Sealed lead acid or gel type.
- Failover: Upon AC loss, instantaneous.
- (Batteries are sold separately).
Fire Alarm Disconnect
- Supervised: Latching or non-latching.
- EOL 10K Resistor.
Supervision
- AC Failure: Form “C” contacts.
- Battery: Form “C” contacts.
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
Indicators LED
- AC Input: 120VAC is present.
- DC Output: Powered.
- Battery: Discharged or not connected.
Two (2) LINQ8PD Network Power Distribution Modules
Input
- Voltage: 24VDC from eFlow104NB and 12VDC from eFlow102NB
- - Input Fuses: 15A/32V
Outputs
- Fuse protected outputs.
- Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
Output Fuses:
- 3A/32V
Status Monitoring
- Power Supply output voltage and load, Voltage and load of each output
- FACP trigger and reset status, Unit temperature (Celsius)
- Power Supply AC and Battery status, Battery health
Reporting:
- Windows Dashboard Alert messages
- E-mail notifications, Event Log tracks history
Indicators (LED)
- Bat Local: Charging current status
- FACP: Triggered / Released
- Input: Input signal
- Out1 - Out8: Output status
Two (2) LINQ8ACM Networked Access Power Controllers
Input
- Voltage: 24VDC from eFlow104NB and 12VDC from eFlow102NB
- Input Fuses: 15A/32V
Outputs
- Fuse protected outputs
- Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
Output Fuses:
- 3A/32V
Programming Features:
Eight (8) Programmable Outputs:
- - Fail-safe, fail-secure or auxiliary outputs
- - Input controlled or manually controlled through software
- - High (over) and low (under) voltage and current monitoring by output
- - Multiple outputs may be programmed to be triggered by a single input
- - Battery back-up by output
Eight (8) Programmable Trigger Inputs:
- - Normally open (NO), Normally closed (NC) or Open collector sink inputs
- - Wet Input (5VDC - 24VDC) with 10k resistor
- - Any combination of the above
Other Programmable Trigger Inputs:
- - Monitor power supply(ies) input for voltage and current limits (high/low)
- - Input and output current calibration, Programmable timer events
- - Programmable user levels, Enable or disable alerts by type
- - Programmable alert reporting delay
Indicators (LED)
- Green AC LED: indicates AC trouble condition
- Green BAT LED: indicates battery trouble condition
- Green FACP LED: indicates FACP disconnect is triggered
- Flashing Blue Heartbeat LED: indicates network connection
- Individual OUT1 - OUT8 Red LEDs: indicate outputs are triggered
- Individual Voltage LEDs: indicate 12VDC (Green) or 24VDC (Red)
NetWay5A - 5 Port Hardened Switch
Input
- Voltage: 24VDC, current draw: 150mA
Ethernet Ports
- Five (5) 10/100 Mbps data ports
- Connectivity: RJ45, auto-crossover
- Wire type: 4-pair CAT5 or better structured cable
- Distance: up to 100m.
- Speed: 10/100 Mbps, half/full duplex, auto negotiation.
Indicators (LED)
- Individual PoE On LEDs for each port
- Individual IP Link status, 10/100Base-T/active LEDs for each port.
Environmental
Temperature
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity
- Relative Humidity: 85% +/- 5%.
BTU/Hr. (approx.):
- 217 BTU/Hr.
Agency Listings
CE Compliant
Accessories
| Name | Description |
|---|---|
| WM5 | Magnetic Cable Tie Mounts |
| WM25 | Magnetic Cable Tie Mounts |
| WM100 | Magnetic Cable Tie Mounts |
| MM4 | Mounting Magnets, Four (4) Quantity per Pack |
| MM8 | Mounting Magnets, Eight (8) Quantity per Pack |
| MM12 | Mounting Magnets, Twelve (12) Quantity per Pack |
| MM24 | Mounting Magnets, Twenty Four (24) Quantity per Pack |
| BR1 | Add-On Mounting Bracket |
| Trove3BWC | Trove Compatible Battery/Wire Enclosure |
| Trove3SWC | Trove Compatible Battery/Wire Enclosure |
Dimensions & Weight
Enclosure:
- Wall mount enclosure for indoor use.
- Accommodates up to four (4) 12VDC/12AH Batteries.
- Dimensions 30.12"W x 36.12"H x 7.06"D (768.1 mm W x 917.5 mm H x 179.3 mm D).
- 3/4" and 1" combination knockouts.
Weights (approximate):
- Product Weigtht: 85.6 Lbs. (38.83 kg).
- Shipping Weigtht: 98.8 Lbs. (44.82 kg).