eFlow6NB

Power Supply Charger, Single Output, 12/24VDC @ 6A, Aux Output, FAI, LinQ2 Ready, 115VAC, Board

Altronix eFlow6NB UL Listed Sub-Assembly power supply/charger converts a 120VAC, 60Hz input into a single 12VDC or 24VDC output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

  • Input
    • Voltage: Input 120VAC 60Hz, 3.5A.
    • Input Fuse: 5A/250V
    • Removable AC input terminal block to facilitate installation and wiring.
  • Outputs
    • Voltage: 12VDC or 24VDC selectable output.
    • Current: 6A continuous supply current.
    • Auxiliary: Power-limited @ 1A (unswitched).
    • Other: Overvoltage protection.
    • Filtered and electronically regulated outputs.
  • Battery Charging
    • Type: Sealed lead acid or gel type.
    • Battery Fuse: 10A/32V.
    • Failover: Upon AC loss, instantaneous.
    • (Batteries are sold separately).
  • Fire Alarm Disconnect
    • Supervised: Latching or non-latching.
    • EOL: 10K Resistor.
  • Supervision
    • AC Failure: Form "C" contacts.
    • Battery: AC Failure Form "C" contacts.
    • Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply)
    • Prevents deep battery discharge
  • Indicators (LED)
    • Input: 120VAC is present.
    • DC Output: Powered.
  • Electrical
      • Temperature:
        • Operating: 0° C to 49° C (32° F to 120° F).
        • Storage: - 20° C to 70° C ( - 4° F to 158° F).
    • Relative Humidity: 85% +/- 5%.
      • BTU/Hr. (approx.):
        • 12VDC: 37 BTU/Hr.
        • 24VDC: 74 BTU/Hr.
UL Listed For:
Access Control System Units (UL294)
Power Supplies for use with Burglar Alarm Systems (UL603)
Power Supplies for Fire Protective Signaling Systems (UL1481)
cUL Listed For:
CSA Standard C22.2 No.205-M1983, Signal Equipment
CAN/ULC - s319-05, Electronic Access Control Systems.
ULC-S318-96 - Power Supplies for Burglar Alarm Systems. Also suitable for Access Control.
Dimensions (approximate):
  • 4.6"W x 7.5"L x 1.75"H (116.84 mm W x 190.5 mm L x 44.45 mm H).
Weights (approximate):
  • Product Weight: 0.8 Lbs. (0.36 kg).
  • Shipping Weight: 0.95 Lbs. (0.43 kg).