AL600UL3X

Power Supply Charger, 3 PTC Class 2 Outputs, 5/12/24VDC @ 3A, 115VAC, BC400 Enclosure

Altronix AL600UL3X triple output power supply/charger is designed for use with access control systems and accessories. It converts a 115VAC / 60Hz input into three (3) individually PTC protected 5VDC, 12VDC and 24VDC regulated outputs.

Input
- Input 115VAC, 60Hz, 3.5A.
Output
- 5VDC, 12VDC, 24VDC simultaneous outputs.
- 5VDC @ 1.75A continuous supply current.
- 12VDC @ 1.75A continuous supply current.
- 24VDC @ 3A continuous supply current.
- Two (2) Class 2 Rated PTC protected power limited outputs (5VDC and 12VDC outputs) and one (1) PTC protected output.
- Outputs are rated @ 2.5A.
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
Battery Charging
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Maximum charge current: 0.7A.
- Zero voltage drop when switched over to battery backup.
- (Batteries are sold separately).
Supervision
- AC fail supervision (form "C" contacts).
- Low battery supervision (form "C" contacts).
- Battery presence supervision (form "C" contacts).
Visual Indicators
- AC input and DC output LED indicators.
Temperature
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: - 20° C to 70°C ( - 4° F to 158° F).
- Relative Humidity: 85% +/- 5%.
- BTU/Hr. (approx.): 52 BTU/Hr.
- System AC input VA requirement: 218.5VA.

UL Listed For:

Access Control System Units (UL294)

Download File

Power Supplies for Fire Protective Signaling Systems (UL1481)

Download File

cUL Listed For:

CSA Standard C22.2 No.205-M1983, Signal Equipment

Download File

CSFM - California State Fire Marshal Approved

Download File

MEA - NYC Department of Buildings Approved

NFPA 72 Compliant

Enclosure:

Wall mount enclosure for indoor use.
Dimensions 12.25"W x 15.5"H x 4.5"D (311 mm W x 394 mm H x 114 mm D).
1.125" and 1.375" combination knockouts.